­

Prototype workbench for the WA Wood Show

We have been looking to add a new range of workbenches to our catalogue and decided to show this Tasmanian Oak flat-top woodworking workbench at the WA Wood Show.

This workbench is 2,000×600 and 900 high. The legs are laminated Tasmanian oak and the shelf and top rails are mortised through the leg for added stability. We wanted to try a different construction method than our usual bolted construction, so the mortise and tenon joints were enjoyable to incorporate.

The top is 64mm thick, so that there is no rebound when hammering and the weight is enough to keep the work surface stable. We also found some beautiful salmon coloured Jarrah boards for the bottom shelf and they are a perfect contrast to the primary timber.

The top is off-centre so that you can sling a vice under the right-hand end (as pictured). It is also a simple task to add dog-holes and a tail vice. The HNT Gordon Tail vice would look great and be a perfect addition to this bench.

Tasmanian Oak workbench

04 August, 2018|Bench, woodworking|0 Comments

Large Hybrid workbench

When this customer came into our workshop to discuss us making a bench for her, she looked at our assembly workbench said that she wanted one just like ours. The workbench takes the Standard workbench and adds a Jarrah board where you work most frequently hence the name РLarge Hybrid workbench.

The bench shown is 1800×1200, with a Jarrah strip on the top as a re-inforced work surface. As the customer said, almost all of the hard work we do on a woodworking bench is in a small area.

There is a wide apron on all sides with this bench to create a heavy workbench that won’t move during any process and gives a vertical clamping surface wherever you need it.

Being a kit bench, it will take at least 2 people to lift the top into position.

IMG_0016

14 December, 2016|Bench, Commission, woodworking|0 Comments