This All Jarrah knock-down kit form bench is 1500l x 760d x 935h and sells for $970 (see table). The Irwin Record V175 woodworking vice fitted on the left adds $115 with an all up price for this particular combination being $1,085.

The bench above is an island style. If your bench is to go against a wall let us know and we will change the configuration to suit. You then get a shallower depth bearer at the rear as well as a jarrah backing strip screwed on behind it which sits up about 40mm above the bench top and stops things falling off. Same price.

If you prefer a shallower depth front bearer as well - fine - just let us know.

Some Custom Built benches can also be produced in a knock-down kit form style. All kit form benches are (Ayers) rock solid

Vice prices are discounted with a charge added to fit them.
Woodworking vices are fitted to the left front edge to suit right handers who plane to the left - if you prefer the right hand front position, please let us know when you order.

Dawn and Record engineering vices can also be fitted at discount prices.
The most popular being the Record "1 Ton" fitted at $85, it has a 100mm (4") grip, anvil at rear, 1 ton of clamping pressure and usable depth of 100mm. The engineering vice is usually fitted on the opposite end of the bench to the woodworking vice.

Choose your bench, size and vice then add the prices together. We don't ask for payment until we actually start on the bench.

The knock-down kit form workbench top and lower sections are fully built for you. You only have to re-fit the legs with the bolts, nuts and washers provided. Holes are pre-bored ready for pushing the bolts through.

The bench has already been assembled in the factory. Mating surfaces have been marked and the bench then dismantled for delivery.

	The legs fit into a cut away section to suit them, the bench MUST stand straight, square and solid - no messing about!
	Top quality touch up sandpaper and Danish oil provided for finishing.
	Pleasing appearance.
	Generous material strength.
	Plenty of cross bars under both top and shelf.
	Jarrah edging rounded, left square edged only where the woodworking vice meets the top
	Recessed lower shelf set back for comfort with jarrah edge all round.
	Built to last generations.

The pricing includes delivery to your door within the main metro areas of Adelaide, Melbourne, Sydney, Canberra, and Brisbane.

Length (mm)		900	1200	1500	1800	2100	2400	2700	3000
600mm Deep	$$$	620	730	840	950	1090	1200	1400	1510
760mm Deep	$$$	710	840	970	1100	1260	1390	1610	1740
900mm Deep	$$$	800	950	1100	1250	1430	1580	1820	1970

As an alternative to kit form benches, fully built benches can be sent to interstate capitals for $60 more than kit form benches. The benches arrive ready for use. See the Main Range section of the site.