PROFESSIONALLY FITTED All prices include GST
	Large front vice Czechoslovakian made, nice movement if mounted accurately. The screw is offset from the centre to allow vertical clamping in the middle. $250
	Sliding tail vice. A quick release vice with 200mm (8") of clamping capacity with 65mm (2 1/2") of throat depth. Bench pups can be mounted into the vice on the top and side front - a handy feature. Two bench pups are included with the vice. $440
	The clamping capacity can be increased by using a detachable block in front of the vice body.
[Click on image to take you where the products are shown in use.]	(1) Hold-Down. Holds items quite well. Not as strong or reliable as the Record Holdfast but cheaper and easier to fit without special skills and without the cost of extra collars. Fits into the same 19mm holes as the other Veritas bench accessories and has 200mm (8") clamping reach and height. $100 (2) Wonder Dog. Can be used in benches with deep tops or fitted into legs. The dog is held at the correct height for clamping by the pressure of the side spring in the body. $45 (3) Bench Wonder Pup. The height is set by a rubber ring $40 (4) Bench Pup. With two Wonder Pups and two Bench Pups all sorts of shapes can be held firm on the bench top. $15
[Click on image to take you to this bench which also shows a Veritas Regular Front Vice.]	A chain driven Veritas Twin Screw Vice. The vice can be skewed slightly for stock that is tapered. The cone shaped extension piece on the handle at right swivels to allow a speedy opening and closing movement. $510
Multipurpose Extension Table [Click on image to take you to this bench which shows a multipurpose table in use.] The table can be clamped onto any existing workbench. If you would like to accurately dog hole your own bench top the patterning of the table can be used as a template. The table has a surface of tempered masonite which is coated to resist glue spills. Size: 850mm square. There are two fences which can be positioned in different rows of holes or at angles to suit sawing, sanding or attaching other traditional bench top devices that can be made in the home workshop. The fence which is set at an oblique angle to the front of the bench shows just one feature of a Veritas bench pup in use with a Veritas wonder pup - a sash cramp. If two wonder pups and two bench pups are used even an 'S' shaped article can be locked up securely within the dog hole patterning of an extension table. Supplied as a kit with two fences, two bench pups, two wonder pups and two holdfasts. Price: $610 plus freight and handling. Delivered free, if part of a bench order.